Grade JSL AUS (J1)
Jindal's economy Cr-Mn austenitic grade for everyday utility applications.
Material Overview
Cr-Mn Austenitic (Jindal proprietary)
JSL AUS (also known as J1) is Jindal Stainless's proprietary low-nickel austenitic grade engineered as a cost-effective alternative for utility applications where extreme corrosion resistance is not the primary requirement. Its higher manganese content compensates for reduced nickel while preserving austenitic ductility and formability.
Equivalent / Comparable: Closest to AISI 201 family
Indicative Price
₹140 – ₹165 / kg
Available Forms
Chemical Composition
Typical wt% Range
| Element | Range (wt%) |
|---|---|
| C | ≤0.15 |
| Mn | 5.5–10.0 |
| Si | ≤1.0 |
| P | ≤0.05 |
| S | ≤0.03 |
| Cr | 13.0–15.0 |
| Ni | 0.5–1.5 |
| N | ≤0.25 |
| Cu | 1.5–3.5 |
Mechanical Properties
Key Utility & Strengths
- ▸Excellent cold formability for stamped & deep-drawn parts
- ▸Lower cost vs. 200/300 series with adequate corrosion resistance
- ▸Good weldability for general fabrication
- ▸Non-magnetic in annealed condition
Industries Served
Where Grade JSL AUS (J1) is Used
Typical Applications
End-Use Components
Why Choose JSL AUS (J1) from Nivesha Alloys
- ✓Most economical Jindal stainless option
- ✓Readily available ex-stock
- ✓Easy to polish to BA / No.4 finish
As an authorised Jindal Stainless co-branding channel partner, all material is supplied with Mill Test Certificates ensuring full traceability and compliance.
Looking for a Reliable Stainless Steel Supplier?
Get a tailored quote on grades, finish & dimensions within one business day.
